PRODUCT

AC Motor

□90mm 90W

기본사양

Speed Control
Tacho-Generator Type

제품목록

■ PERFORMANCE DATA (DUTY : CONTINUOUS)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Starting Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Torque
(kgf·cm)
(V) (㎌)
IHT9PG90-10 90 1ø100 50 90~1400 4.14 1.55 1.80 4.20 250 25.0
60 90~1700 4.14 1.55 1.80 5.40
IHT9PG90-11 1ø110 60 90~1700 4.87 1.83 1.80 6.50 250 25.0
IHT9PG90-20 90 1ø200 50 90~1400 4.14 1.55 1.20 4.50 450 7.0
60 90~1700 4.14 1.55 1.20 5.50
IHT9PG90-22 1ø220 60 90~1700 4.87 1.83 1.20 6.80 450 7.0
IHT9PG90-1U 90 1ø115 60 90~1700 4.87 1.83 1.80 6.00 250 20.0
IHT9PG90-2C 90 1ø220 50 90~1400 4.87 1.83 0.81 5.50 450 5.0
100 1ø240 50 90~1700 5.68 2.03 0.81 6.50

■ PERFORMANCE DATA (DUTY : 30 Min.)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Starting Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Torque
(kgf·cm)
(V) (㎌)
RHT9PG90-10 90 1ø100 50 90~1400 6.21 1.55 2.30 5.00 250 30.0
60 90~1700 6.21 1.55 2.30 5.00
RHT9PG90-11 1ø110 60 90~1700 7.30 1.83 2.30 6.00 250 30.0
RHT9PG90-20 90 1ø200 50 90~1400 6.21 1.55 1.30 6.00 450 7.0
60 90~1700 6.21 1.55 1.30 6.00
RHT9PG90-22 1ø220 60 90~1700 7.30 1.83 1.30 7.00 450 7.0
RHT9PG90-1U 90 1ø115 60 90~1700 7.30 1.83 2.00 5.50 250 25.0
RHT9PG90-2C 90 1ø220 50 90~1400 7.30 1.83 0.97 5.70 450 6.0
100 1ø240 50 90~1700 8.11 2.03 0.97 7.00
  • Motor Type은 감속기 직결용인 피니언축으로 표시하였습니다.
    STRAIGHT축의 모터를 희망하시면 Motor Type의 PG를 S로 바꾸어 주문하십시오.
  • 그린상자표시한 모터는 UL 또는 CE규격을 적용한 TP(Thermal Protect) Type입니다
  • 정격부하 보다 크거나 주위온도가 40℃이상의 조건에서는 온도상승이 급격히 되므로 연속사용이 불가능 합니다.
  • 회전방향을 바꿀 때에는 반드시 전원을 차단한 후 정지된 상태에서 재결선 하시기 바랍니다.
  • For motor with straight shaft, please write S in place of PG in Motor Type. 
  • Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation. 
  • It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40
  • when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.

■ MOTOR(STRAIGHT SHAFT)I(R)HT9S90WT 3.7kg

■ GEARED MOTORI(R)H9TPG90 + 9H□ GBBWT 3.7+1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GB M6×90

■ KEY SPEC

■ GEARED HEAD9H□ GBFWT 1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GBF M6×25

■ KEY SPEC

■ DECIMAL GEAR HEAD9H10XGWT 0.6kg

■ WIRING DIAGRAM

  • 모터의 회전방향은 샤프트 끝쪽에서 볼때의 회전방향입니다.
  • 모터의 회전방향 전환은 모터가 완전히 정지한 후 실시하여 주십시오.
  • The direction of rotation is seen from the end of motor shaft.
  • Change the rotation direction of the motor only after the motor stops completely.