PRODUCT

Stepping Motor

KH56QM2 TYPE

기본사양

Step Angle : 1.8
Voltage : 3.54~9.9V
Current : 1.0~3.0
Inductance(mH/Phase) : 2.4~21.6
Holding Torque(mN/M) : 1324
Rotor Inertia(g/cm²) : 269

제품목록

■ STANDARD SPECIFICATIONS

MODEL KH56QM2
SINGLE SHAFT -901 -902 -903 -951
DOUBLE SHAFT -911 -912 -913 -961
DRIVE METHOD ──── UNI-POLAR BI-POLAR
NUMBER OF PHASES ──── 2 2
STEP ANGLE deg./step 1.8 1.8
VOLTAGE V 3.54 5.46 9.9 4.0
CURRENT A/PHASE 3.0 2.0 1.0 2.0
WINDING RESISTANCE Ω/PHASE 1.18 2.73 9.9 2.0
INDUCTANCE mH/PHASE 2.4 5.4 21.6 7.35
HOLDING TORQUE mN・m 1324 1324 1324 1373
oz・in 187 187 187 194
DETENT TORQUE mN・m 69 69 69 69
oz・in 9.8 9.8 9.8 9.8
ROTOR INERTIA g・cm2 269 269 269 269
oz・in2 1.47 1.47 1.47 1.47
WEIGHTS kg 1.0 1.0 1.0 1.0
Ib 2.2 2.2 2.2 2.2
INSULATION RESISTANCE ──── 500VDC 100MΩmin.
DIELECTRIC STRENGTH ──── 500VAC 50HZ 1min.
OPERATING TEMP. RANGE 0 to 50
ALLOWABLE TEMP.RISE K 70

■ Features

  • Stronger torque generated in higher speed zone (KH56KM2-901 generates 1.2 times torque of our previous model at 1200 r/min. speed)
  • Lowered Vibration by increased stiffness of body construction (lowered by 10% than our previous model)
  • Improved Efficiency (1.1 times of our previous model, by high grade materials)

■ DIMENSIONSunit = mm (inch)

■ TORQUE CHARACTERISTICS vs. PULSE RATE

■ CONNECTION DIAGRAMS

■ CONNECTION CABLE TO MOTORunit = mm (inch)